Scenting
brands building,customer retention,
performance enhancement

Safe to use

NO TOOLS REQUIRED

NO MECHANICAL
INSTALLATION

NO POWER SUPPLY

IN SOLID FORM-NO SPILLS

ECO FRIENDLY

SAFE TO TRANSPORT

Installation manual

  • Scent Film Packaging

    Scent Film and Sleeve are separately, in order for Scent Film to be activated easily

  • Steps to activate ScentFilm

    1. Squeeze ScentFilm to break the inner silver bag
    2. Squeeze SentFilm further to release the get from the inner silver bag into the outer black bag
    3. Squeeze ScentFilm thoroughly to ensure all gel is released
    4. ScentFilm is ready to be used
  • Application in square units

    Step 1
    Remove ScentFilm from its packaging and insert it into the Sleevs

    Step 2
    Insert the Sleev (with ScentFilm) into the diffuser, ensuring the black side of the Sleevs is facing Downwards.

    Step 1
    Push the Sleevs further into the diffuser, until it is entirely withing the diffuser and invisible.

    Notes
    A maximum of 2 Sleevs can be applied in each diffuser; however do ensure they are not overlapping one another.
    During refill, remove the Sleeve with a tweezer and repeat Steps 1 - 3. The exhausted Scentfilm can be discarded as normal waste. If in good condition, Sleevs can be reused.

  • Application in round units

    Step 1
    Remove Scentfilm from its packaging and insert into the Sleeve

    Step 2
    Insert the Sleeve (with ScentFilm) into the diffuser, ensuring the black side of the Sleeve is facing downwards.

    Step 3
    Push the Sleeve further into the diffuser, until it is entirely within the diffuser and invisible

    Notes
    A maximum of 2 Sleevs can be applied in each diffuser; however, do ensure they are not overlapping one another.
    During refill, remove the Sleeve with a tweezer and repeat Step 1 - 3. The exhausted ScentFilm can be discarded as normal waste. If in good condition, Sleeves can be reused.

  • Application in rectangular units

    Step 1
    Remover ScentFilm from its packaging and inset it into the Sleeve.

    Step 2
    If the flaps are movable, turn them at an angle to allow easy insertion of the Sleeve (with ScentFilm)

    Step 3
    Insert the Sleeve into the diffuser (above the flaps).

    Step 4
    Push the Sleeve further into the diffuser, until it is entirely within the diffuser and invisible. Turn the flaps back to their original position

    Notes
    During refill, remove the Sleeve with a tweezer and repeat Step 1 - 4. The exhausted ScentFilm can be discarded as normal waste. It in good condition, Sleeves can be reused.

  • Application in cassette units

    Step 1
    Remove ScentFilm from its packaging and insert it into the Sleeve.

    Step 2
    Open the centre portion of the unit.

    Step 3
    With a clip, secure the Sleeve (with ScentFilm) into the fitter (insert), Ensure the black side of Sleeve is facing downwards.

    Step 4
    Close the centre portion of the unit

    Notes
    A maximum of 2 Sleeves can be applied in each unit, however, do ensure they are not overlapping one another
    During refill, remove the Sleeve and repeat Step 1 - 4. The exhausted ScentFilm can be discarded as normal waste. If in good condition, Sleeves and clips can be reused.

  • Building Brands with Scent Marketing
  • Technology behind scent film

Building Brands with Scent Marketing

The development of a signature scent allows you to set one step ahead of the competition by creating a unique mark in the mind of your customers.

Creating a signature fragrance is a complex multidisciplinary project,that PerfectAire has streamlined into four steps.

The first step, or Brand Characterization, requires an holistic approach to analyze and combine all aspects of the brand identity. This may require significant exchanges of information with your marketing department.

Once your Brand has been categorized, we start the Scent Mapping: the identification of the Base, Hearth, and Top notes of the fragrance that reflect the concepts highlighted during the characterization.

The scent Mapping usually identifies two to thee fragrances that are later presented to you for the final Scent Selection through user groups.

Finally, once the selection has been finalized, there is a technical Fine Tuning to optimize the fragrance's performance.At this point, we are already scenting your flagship store, and we are ready to go live in all your stores.

As we only uses fragrances designed and produced in Europe, the four steps of the project may last between 6 to 12 weeks. All our products are produced in our factory in Singapore, offering the complete peace of mind of a quality driven, reliable, and environmentally friendly solution.

Technology behind scent film

Poly-metrix™ is Hydroemission's proprietary technology, which allows the conversion of most active ingredients such as essential oils and fragrances into solid, timed-release, ready-to-use products.

Once applied in the environment, these products release the active ingredients into the air or water at specified dosages, consistently over the pre-determined usage period.

At the end of the usage period, the products degrade completely with no visible residue


Our Certifications

MUIS Singapore

Singapore Environment Council

We only use fragrances manufactured in Europe under the guideline of IFRA International Fragrance Association

Award

Singapore Environmental Achievement Award (SEAA) SEC-Senoko Green Innovation Award 2012

Emerging Enterprises Best Innovation Award 2011